La Lune - Dim (TM)

$24.95
Maximum Purchase:
2 units
Maximum Purchase Quantity:
2 pcs
Quantity changing:
Click the number of quantity and enter the amount
la lune - Dim
4 level Step Dimming Occupancy Sensor Light Sensor Type DLC Cut Sheet Ballast Compatibility List
    A
4.2 Download Download
*IP: In Process

 

La Lune - The World’s First Plug and Play LED tube compliant with California Title 24.

CelloLighting's La Lune LED lamp creates a smart lighting solution performing occupancy sensing and daylight harvesting and 4-section diming functions using traditional fluorescent lamp fixtures without the need for any rewiring and installation of any external sensors.

la-lune-t8-4ft-0510-03.jpg

Built-in Dimming function
Dimming without dimmer - User can choose four levels of dimming by turning off and on the light switch. No need for dimmer and dimmable ballast.

Plug and Play
Plug and Play - Compatible with most traditional T8 4ft fluorescent light fixtures using e-ballasts. A list of compatible ballasts can be found in http://www.cellolighting.com/

La Lune LED lamp is an all in one tube at the cost of a regular LED tube. You build a smart lighting system without the hassles of installing many external sensors, wire or wireless controllers. Everything is self contained. Very easy to maintain.
 
Application 
Conference room or General office.

 

BENEFITS AND PERFORMANCE

  • 3 color temperatures: 3000K, 4000K, 5000K.
  • 50-80% reductions in energy consumption.
  • 5-Year warranty.
  • 50,000 hour lifespan.
  • Instant illumination.
  • No scalloping or flickering.
  • No UV emission.
  • Tight LED binning creates consistent color temperature.
  • Capable of indoor usage in -5ºF to 115ºF temperature range.
  • 100% recyclable.
  • Cool to the touch.
  • Suitable for damp locations. 

leadfree.png

 

Optical Parameters

For full specification, please download Product cut sheet. Download

 
 La lune T8 4FT DimLa lune T8 4FT DimLa lune T8 4FT DimLa lune T8 4FT Dim
1 2 3 4
19W 16W 11.5W 8W
2280 Lm 1760 Lm 1150 Lm 720 Lm
120 110 100 90
≥ 80 ≥ 80 ≥ 80 ≥ 80
300° 300° 300° 300°

Ballast Compatibility List

Warning: Lamp warranty only valid when using ballast from corresponding compatibility list. Using the wrong ballast may be hazardous to the tubes. If using a ballast not listed here, please contact Cello customer service at customer_service@cellolighting.com or call 1-888-588-8849 for further assistance.

Download

 

Installation Instruction 

  1. Turn Power OFF
  2. Remove lens or diffuser (if applicable)
  3. Remove existing fluorescent lamps from the luminance
  4. Examine the lamp holders on each side of the light fixture. Make sure they are not rusty or loose due to aging. Replace the lamp holders with new ones if they are not making good contacts
  5. Check existing ballast to make sure they are on the compatible ballast list. Call 1-888-588-8849 or go to www.cellolighting.com for updated ballast compatibility list.
  6. Install the La Lune LED tubes into lamp holders of the light fixture just like installing a fluorescent tube.
  7. Make sure that the La Lune LED tubes are tightly mounted on the lamp holder. A loosing installation may cause bad contact or even fire hazard. A loosing installation may also drop the tubes from the fixture causing damage.
  8. Place lens or diffuser back in place (if applicable)
  9. Switch power ON.

For full instructions, please download file here.

Download

 

Operation Instruction

  1. Plug and Play only for e-ballasts in our published ballast lists. Recommend to replace ballasts if not compatible.

Videos Hide Videos Show Videos